Modeling of radiative heat transfer in an axisymmetric cylindrical enclosure with participating medium

Radiative heat transfer in an axisymmetric enclosure with absorbing, emitting, and scattering medium is studied here by using the different methods such as MDOM, FVM, and MFVM with emphasis on the treatment of angular derivative term, which appears in curvilinear coordinates due to angular redistribution. After final discretization equation for MFVM is introduced by using the step scheme and directional weights, the present approach is validated by applying it to three different benchmarking problems with absorbing, emitting, and scattering medium. All of the results presented here support its accuracy as well as moderate efficiency. Finally, the present approaches are applied to a truncated cone-shaped enclosure as a body-fitted geometry case.     

Writhing instabilities of twisted rods: from infinite to finite length

We use three different approaches to describe the static spatial configurations of a twisted rod as well as its stability during rigid loading experiments. The first approach considers the rod as infinite in length and predicts an instability causing a jump to self-contact at a certain point of the experiment. Semi-finite corrections, taken into account as a second approach, reveal some possible experiments in which the configuration of a very long rod will be stable through out. Finally, in a third approach, we consider a rod of real finite length and we show that another type of instability may occur, leading to possible hysteresis behavior. As we go from infinite to finite length, we compare the different information given by the three approaches on the possible equilibrium configurations of the rod and their stability. These finite size effects studied here in a 1D elasticity problem could help us guess what are the stability features of other more complicated (2D elastic shells for example) problems for which only the infinite length approach is understood.     

Review and complements on mixed-hybrid finite element methods for fluid flows

Mixed and hybrid finite element methods for the resolution of a wide range of linear and nonlinear boundary value problems (linear elasticity, Stokes problem, Navier–Stokes equations, Boussinesq equations, etc.) have known a great development in the last few years. These methods allow simultaneous computation of the original variable and its gradient, both of them being equally accurate. Moreover, they have local conservation properties (conservation of the mass and the momentum) as in the finite volume methods.The purpose of this paper is to give a review on some mixed finite elements developed recently for the resolution of Stokes and Navier–Stokes equations, and the linear elasticity problem. Further developments for a quasi-Newtonian flow obeying the power law are presented.     

双面电弧焊接的传热模型

将等离子焊接(PAW)电弧和钨极氩弧焊(TIG)电弧串接,相对作用于工件的正反面形成双面电弧焊接(DSAW)系统,可以引导焊接电流沿工件厚度方向流过小孔,补偿等离子电弧穿透工件时消耗的能量,以有效地提高等离子弧的穿透能力.综合考虑影响双面电弧焊接正反面熔池几何形状的力学因素,建立了熔池表面变形的控制方程,以此为基础并采用帖体曲线坐标系建立了DSAW焊接传热的数学模型,分析了DSAW,PAW焊接传热的差异,从传热的角度解释了DSAW焊接熔深增加的原因.焊接工艺实验表明,计算结果与实测结果吻合良好. 关键词： 双面电弧焊接(DSAW) 传热模型 熔池表面变形模型     

19F+27Al耗散反应中双核系统的转动与形变

测量了¹⁹F+²⁷Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110.25MeV到118.75MeV, 能量步长为250keV. 从产物的 能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量, 与相粘模型计算的刚体转动惯量相比较, 结果表明形成的双核系统有大的形变.     

正态分布下任意秩有限总体中的Minimax预测

对于任意秩有限总体,在二次损失下,有关文献已给出了线性可预测变量在齐次线性预测类中的唯一线性Minimax预测．本文在正态假设下,证明了这个线性Minimax预测也是线性可预测变量在一切预测类中的唯一Minimax预测．     

On Polynomial Functions over Finite Commutative Rings

Let R be an arbitrary finite commutative local ring. In this paper, we obtain a necessary and sufficient condition for a function over R to be a polynomial function. Before this paper, necessary and sufficient conditions for a function to be a polynomial function over some special finite commutative local rings were obtained.     

双光束相干控制产生多次谐波的实验验证

利用两束相干度可改变的飞秒脉冲光对产生的五次谐波的强度特性进行了研究，发现谐波信号的强度随相干程度的增大而增加，谐波信号的最大值相对于相干零点(双光束相干度最大处)是非对称的，从而证明了合成的激光脉冲波形变化对谐波信号的影响.同时对谐波的受激放大理论进行了初步的实验探索和展望. 关键词： 五次谐波 波形变化 相干 受激放大     

A finite element-spherical harmonics radiation transport model for photon migration in turbid media

In this paper, we solve the steady-state form of the Boltzmann transport equation in homogeneous and heterogeneous tissue-like media with a finite element-spherical harmonics (FE-P_N) radiation transport method. We compare FE-transport and diffusion solutions in terms of the ratio of absorption to reduced scattering coefficient, (μ_a/μ_s′) and the anisotropy factor g. Two different scattering phase function formulas are employed to model anisotropic scattering in the slab media with high g-value. Influence of void-like heterogeneities, and of their boundaries with the surrounding medium on the transport of photons are also examined.     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.